Hydrocarbon Reservoir Characterization of ‘Khume’ Field, Offshore Niger Delta, Nigeria

The integrative approach of well log correlation and seismic interpretation was adopted in this study to adequately characterize and evaluate the hydrocarbon potentials of Khume field, offshore Niger Delta, Nigeria. 3-D seismic data and well logs data from ten (10) wells were utilized to delineate the geometry of the reservoirs in Khume field, and as well as to estimate the hydrocarbon reserves. Three hydrocarbon-bearing reservoirs of interest (D-04, D-06, and E-09A) were delineated using an array of gamma-ray logs, resistivity log, and neutron/density log suites. Stratigraphic interpretation of the lithologies in Khume field showed considerable uniform gross thickness across all three sand bodies. Results of petrophysical evaluations conducted on the three reservoirs correlated across the field showed that; shale volume ranged from 7-14%, total and effective porosity ranged from 19-26% and 17-23% respectively, NTG from 42 to 100%, water saturation from 40%-100% and permeability from 1265-2102 mD. Seismic interpretation established the presence of both synthetic and antithetic faults. A total of six synthetic and four antithetic faults were interpreted from the study area. Horizons interpretation was done both in the strike and dip directions. Time and depth structure maps revealed reservoir closures to be anticlinal and fault supported in the field. Hydrocarbon volumes were calculated using the deterministic (map-based) approach. Stock tank oil initially in place (STOIIP) for the proven oil column estimated for the D-04 reservoir was 11.13 MMSTB, 0.54 MMSTB for D-06, and 2.16 MMSTB for E-09A reservoir. For the possible oil reserves, a STOIIP value of 7.28 MMSTB was estimated for D-06 and 6.30 MMSTB for E-09A reservoir, while a hydrocarbon initially in place (HIIP) of 4.13 MMSTB of oil equivalents was derived for the undefined fluid (oil/gas) in D-06 reservoir. A proven gas reserve of 1.07 MMSCF was derived for the D-06 reservoir. This study demonstrated the effectiveness of 3-D seismic and well logs data in delineating reservoir structural architecture and in estimating hydrocarbon volumes